Hand lever valves - Series 84-4H
5/2-way valves and 5/3-way valves
Connection sizes G1/8 to G1/2
Series 84-4HF
Technical details
- Connection: G1/8 - G1/4
- Nominal size: 4.5 mm - 6 mm
- Temperature range: 0°C...+60°C
Versions:
- 5/2-way, 5/3-way
Actuator:
- hand lever, non detend
Series 84-4HR
Technical details
- Connection: G1/8 - G1/2
- Nominal size: 4.5 mm - 6.5 mm
- Temperature range: 0°C...+60°C
Versions:
- 5/2-way, 5/3-way
Actuator:
- hand lever, detend
Hand lever valves - 84-4H series
The 84-4H series hand lever valves from AIRTEC Pneumatic offer you a reliable and powerful solution for your pneumatic applications. These valves are available in different variants, including 5/2-way and 5/3-way valves, which are ideal for a wide range of control and drive functions. With connection sizes from G1/8 to G1/2, they adapt flexibly to different system requirements.
The 84-4H series is available in two versions: the 84-4HF series and the 84-4HR series, each of which is designed for different operating conditions. The 84-4HF series has connection sizes from G1/8 to G1/4 and a nominal diameter of 4.5 mm to 6 mm, while the 84-4HR series has connection sizes from G1/8 to G1/2 and a nominal diameter of 4.5 mm to 6.5 mm. Both series operate in a temperature range from 0°C to +60°C and offer high performance even under extreme conditions.
The hand lever valves can be actuated in two ways: by touch on the 84-4HF series and by latching on the 84-4HR series. This enables precise control of your pneumatic systems, depending on your requirements.
Rely on the hand lever valves in the 84-4H series for your most demanding pneumatic applications and benefit from AIRTEC's outstanding quality and expertise.
Key Facts
- Connection sizes: G1/8 to G1/2
- Nominal width: 4.5 mm to 6.5 mm
- Temperature range: 0°C to +60°C
- Valve versions: 5/2-way, 5/3-way
- Actuation: Push-button lever (series 84-4HF), latching lever (series 84-4HR)
Contact us
Do you have a special requirement or an idea?
Let's find a solution together!
We look forward to your enquiry.
Phone: +49 6173 95620
E-Mail: info@airtec.de
Your benefits with AIRTEC
AIRTEC has stood for innovation, precision and quality ‘Made in Germany’ since 1975. The medium-sized family business develops customised pneumatic solutions and focuses on customer proximity, flexibility and the highest standards.
With a modern technology centre in Reutlingen and subsidiaries worldwide, AIRTEC supplies reliable technology for a wide range of sectors - from industry to aerospace.
- Over 50 years of experience
- Top quality - Made in Germany
- Fast delivery
- First-class service and support
- Customised solutions for your application
FAQs
Frequently asked questions about mechanical valves, applications and customised solutions from AIRTEC.
Whenever no control signal is available: without a power supply, in set-up and manual operation, for shutting off and exhausting, and for end-position sensing without electronic sensors. If the machine is electrically controlled anyway, a solenoid valve is the better choice.
Mechanically operated means that a machine part switches the valve, for example via a plunger or roller lever. Manually operated means that an operator switches it via a hand lever, push button or foot pedal. This distinction is not defined by any standard.
AIRTEC does not offer dedicated NO versions. However, many series allow flow in both directions and can be operated as NO by connecting the compressed air supply to port 3 instead of port 1.
Yes. Selected series are available as ATEX versions, and a large proportion are approved for use in hazardous areas, as they have no electrical ignition source of their own; mechanical ignition sources are assessed depending on the installation conditions. A prerequisite is a ported exhaust with a threaded connection so that the exhaust air can be routed out of the zone. Small plunger and push-button valves with an open exhaust hole do not meet this requirement.
The service life corresponds to that of the other AIRTEC series, as the valve internals are largely identical. In practice, the number of switching cycles is rarely the limiting factor here. Spare parts are available for wearing parts such as the lever.
Compressed air to ISO 8573-1:2010, Class 7:2:4 (filtered, oil-free, dried and free from aggressive constituents). However, the pressure dew point must be at least 10 °C below the lowest expected ambient temperature. The same requirements apply as for the pneumatically and electrically operated series.